A shower door that drags, sags, or won't close right isn't just an annoyance. Worn rollers and hinges put the whole panel under stress, and misaligned glass wears the hardware down faster every week you use it. And that cracked glass panel you keep meaning to deal with? Tempered glass can let go without warning, and when it does, someone in your family could get hurt.
Naples humidity and salt air are hard on shower hardware. Standard hinges, rollers, and seals corrode here far faster than they would in a drier climate, which is why doors in this area tend to need attention sooner.
That's where we come in. We do professional shower door repair throughout Naples, FL, handling everything from a worn seal or sweep to emergency glass replacement. Frameless enclosure in Park Shore? Framed door in Old Naples? We'll get it back to working order.
Don't let a damaged shower door turn into costly water damage in your Naples home. Call us now at (239) 350-5488 for same-day shower door repair, or schedule your free estimate online.
We handle every shower door repair a Naples homeowner is likely to need, from a quick seal swap to a full hardware overhaul. That covers both frameless and framed doors, getting your enclosure safe and watertight again.
Cracked or chipped shower glass puts both your safety and your waterproofing at risk. We look at the damage first and tell you straight whether a repair or a full panel replacement makes sense. With tempered glass, even a small crack usually means the whole panel has to go. That's the only way to keep it structurally sound and stop a sudden shatter. We work with every thickness, from standard 1/4-inch framed glass to heavy 1/2-inch frameless panels.
Shower door hardware takes a beating from daily use, humidity, and that Naples salt air. We repair and replace hinges, handles, towel bars, door pulls, and support brackets. Frameless doors need heavy-duty hinges built to carry the weight of thick glass with no frame helping out. We stock premium hardware that holds up against corrosion in our coastal environment.
Seals and sweeps are the first parts to wear out on a shower door. We replace bottom sweeps, side seals, magnetic strips, and gaskets with quality replacement parts made to last. Each job includes a thorough cleaning of the mounting surfaces, precise measuring and cutting, and a professional install so the door closes and seats the way it should.
Sliding doors run on tracks and rollers, and those collect soap scum, hard water buildup, and grime fast. We deep-clean the tracks, swap out worn rollers, and realign the door so it glides again. Stay on top of track maintenance and you'll add years to the door's life by taking stress off the glass and hardware.
Repair is the right call for most shower door problems, usually running 40-60% less than full replacement while still giving you years of solid use (source).
Go with repair when the trouble is isolated and the overall structure is fine. Broken hinges, handles, or rollers? Ideal repair jobs. Deteriorated seals and gaskets fall in the same bucket, since fresh weatherstripping restores your waterproofing for a fraction of what replacement costs. A single cracked panel can often be swapped on its own, especially in framed doors. Alignment trouble, track issues, and minor frame corrosion all respond well to a professional fix.
Replacement becomes the smarter move once the damage is widespread or the door has simply worn out. Several cracked panels, frame corrosion running through the whole structure, or compromised structural integrity all point to replacement as the safer, more economical long-term choice. And if you're already planning a bathroom remodel, replacement is your chance to upgrade to a clean frameless look.
Typical shower door repairs in Naples run from $150 to $600. Full replacement starts around $800 for a basic framed door and can climb past $2,000 for a custom frameless enclosure. We give you an honest read and a clear side-by-side on cost, so you can pick what's right for your budget.
We repair shower doors with a step-by-step diagnostic that finds the worn part and matches it to the right fix. Most problems trace back to worn seals and sweeps, tired rollers or hinges, a misaligned door, or cracked glass.
We start with a close inspection to pin down exactly what has failed. That means checking every seal and strip of weatherstripping, testing the rollers and hinges, checking how the door sits in the frame, and looking the glass over for cracks and chips.
Once we know the culprit, out comes everything that failed. We pull the worn seals and hardware and clean the mounting surfaces down. Then we install new parts built specifically for showers, using components that fight corrosion and stay flexible in our humid Naples air.
Alignment is where most of the skill lives. We reset the door in the frame, adjust the rollers or hinges to spec, and make sure the panel hangs square so it opens smoothly and closes flush every time.
When we're done, we test it. We cycle the door repeatedly and confirm it moves cleanly and latches properly. Good prep and good parts are what keep the problem from coming back.
Frameless and framed shower doors call for different repair approaches, because they're built differently, use different hardware, and carry their weight in different ways.
Frameless doors use thick tempered glass (typically 3/8-inch to 1/2-inch) that leans entirely on heavy-duty hardware for support. The hinges, clips, and brackets carry the full weight of the glass with no frame backing them up. When we repair these, we use premium hardware engineered specifically for frameless setups. Glass replacement costs more here thanks to the thicker panels and custom cutting. Alignment matters enormously too, since a frameless door has to sit just right to close and seal.
Framed doors put a metal frame around the glass to hold and support it, which lets them use thinner glass (usually 1/4-inch). The hardware mounts to the frame instead of the glass itself, so repairs go quicker. Parts are easier to find and cheaper than frameless components.
Frameless repairs generally run 20-40% more than the same job on a framed door, between the specialized parts and the extra labor. We keep a deep inventory for both, which lets us wrap up most repairs in one visit.
Yes, we offer same-day emergency shower door repair across Naples and the surrounding Collier County communities. Some problems just can't wait. Shattered glass is an immediate hazard, and a serious leak does damage every hour it sits.
Our emergency service puts safety first: broken glass, a door that's come off its hinges, a major leak. For true emergencies in the Naples area, we typically arrive within 2-4 hours.
We cover every Naples neighborhood, including North Naples, Old Naples, Park Shore, Pelican Bay, Aqualane Shores, and Port Royal. Our central location lets us move fast across the region.
Call (239) 350-5488 any time you've got an urgent shower door problem. We'll help you sort out the emergency quickly and do it right.
Shower door repair in Naples typically runs from $150 to $600 for most common jobs, with the final number depending on the specific problem, the door type, and the parts involved.
Door type swings the price a lot. Frameless doors generally cost more to repair than framed ones, thanks to specialized hardware and thicker glass. How bad the damage is matters too, since a minor seal swap takes far less labor and material than fixing several components at once. Labor complexity plays in as well: a simple seal replacement takes 45-60 minutes, while a full door realignment can run 2-3 hours. Emergency calls outside business hours usually carry an added fee.
Seal and gasket replacement usually costs $150-$300, covering all new weatherstripping and a professional install. It's one of the most affordable fixes, and it knocks out the most common leak problems.
Hardware replacement runs $200-$450 depending on what's needed. A basic handle starts around $200, while a complete hinge replacement on a frameless door can reach $450.
Glass panel repair or replacement ranges from $300-$600 for a single panel. That covers removing the damaged glass, precise measurement, a new tempered panel, and installation.
Full door realignment and adjustment costs $250-$500. We tune all the hardware, confirm a proper close, and test for leaks.
Track cleaning and roller replacement on sliding doors typically runs $175-$350, including the deep clean, new rollers, and adjustment.
We provide free estimates on every repair, so you know the exact price before we start. And our work comes with warranty coverage on parts and labor.
No, a cracked shower door is not safe to use, and it needs a professional look right away. Even a small crack in tempered glass creates a serious risk: sudden, total failure that can hurt someone.
Once tempered glass cracks, its strength is gone. The crack breaks the internal stress pattern that holds tempered glass together, leaving the whole panel unstable. From there, it can shatter on its own from a temperature swing, a little vibration, or a minor bump. All things that happen in a bathroom every single day.
There's more than the shatter risk, too. A crack leaves sharp edges that can cut you during an ordinary shower.
Find a crack in your shower door? Stop using that shower right now and call us for professional repair. We run same-day service across Naples to pull the dangerous glass and get your shower safe again.
Never try to fix cracked shower glass yourself. Tempered glass takes professional handling and replacement, full stop. Call (239) 350-5488 for immediate help with any shower door safety concern.
"*" indicates required fields